Tady je nějaký postup:

Recover the system with the Driver CD

If your notebook is equipped with an optical disk drive device or an external one,
you may perform the System Recovery Function with Driver CD that comes with
the package.
Follow the instructions below to continue:
1. Insert the Driver CD into the optical disk drive, and then restart the notebook
by pressing the Power button.
2. Press the F11 hotkey on the keyboard of the notebook when the following
message appears on the display.
3. Select the [CD/DVD] device as the boot device, and press [Enter] to confirm
the selection, and then, press any key to reconfirm the selection when the
prompt message of [Press any key to boot from CD or DVD…] appears.
4. The Language Menu appears. Select the language you prefer by clicking
the given icon with the mouse connected to the notebook; or select [EXIT] to
restart the system.
5. And then, select [Restore the system to factory default] to start the System
Recovery Function process; or select [EXIT] to restart the system.
6. The system recovery process will format your hard disk drive partition; make
sure that the important data has been backed up before continuing the
process. Click [OK] to continue; click [Cancel] to stop the system recovery
process.
7. AC power is required while proceeding the System Recovery Function.
Assure that the AC power is connected to the notebook before moving
forward to the next step.
8. Be aware of that do not turn off the system power during the process of
performing the System Recover Function, or it may cause some unknown
damage to the system.