Jsou zobrazeny jen nové odpovědi. Zobrazit všechny
Předmět Autor Datum
můžeš zkusit nabootovat memtest. nebo si pučit jinou ramku ddr3 do notebuku.
lední brtník 16.08.2014 17:08
lední brtník
Nabootovat to bohužel nejde. Takže bude problém v RAMce?
MartinaM 16.08.2014 17:35
MartinaM
stejně postižený případ: http://pc.poradna.net/q/view/1278529-win32k-sys-bl ue-screen?page=r1279733#…
lední brtník 16.08.2014 18:55
lední brtník
Nee z CD to bohužel nabootovat nejde. Mohu poprosit o detailnější návod jak to nabootovat z live sys…
MartinaM 16.08.2014 20:38
MartinaM
do biosu se dostaneš? pořadí bootování zvolíš? některé z výše uvedených boot cd máš? nový
lední brtník 16.08.2014 21:41
lední brtník
Podarilo se mi nabootovat to z cd ale kdyz chci dat upgrade windows tak me to zobrazi zpravu o kompa… nový
MartinaM 20.08.2014 21:15
MartinaM
Podarilo se mi nabootovat to z cd, ale kdyz chci dat upgrade windows potom by se upgradovaly ty win… poslední
lední brtník 20.08.2014 21:39
lední brtník

Podarilo se mi nabootovat to z cd, ale kdyz chci dat upgrade windows

potom by se upgradovaly ty windows na boot cd - to jaksi nedává smysl.

dával jsem odkaz na jiný případ, kde je odkaz na článek:

Another solution: Try to delete C:\Windows\System32\FNTCACHE.DAT.

1. You will need the Win32k.sys and Gdi32.dll files from the System32 directory on a system that has not received the patch. This source system must also have the same bit width, ie. 32-bit or 64-bit, and it should be at the same service pack level.

2. Use Hiren's Boot CD or similar boot disc to boot, OR take the drive out of the system and plug it into another system as a secondary drive. I used HBCD and was fortunate enough to have a second drive with a pre-update Windows installation.

3. Back up the Win32k.sys and Gdi32.dll files from the affected Windows installation. It doesn't matter where, and they are small.

4. Overwrite the affected installation's Win32k.sys and Gdi32.dll files from your copy taken from the other working installation.

5. Boot the now-operational system.

6. Uninstall the KB update via the Programs and Features control panel, View Installed Updates sidebar link, so it isn't left in an indeterminate state. This will require a reboot. Your system will boot normally.

Zpět do poradny Odpovědět na původní otázku Nahoru