Dobrý den. Jak v BIOSE nastavit taktování procesoru E8500 na zakl. desce gigabyte 945gcmx - s2 ?? Když dám do automatu nebo enabled tak po chvílce ve windows 10 se zobrazí smajlík a NMI HADWARE FAILURE. Ale když dám menší frekvenci asi tak 2,40Ghz tak jde normálně.
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Core 2 Duo E8500
Codename Wolfdale
Specification Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping E0
Technology 45 nm
TDP Limit 65.0 Watts
Core Speed 1607.6 MHz
Multiplier x Bus Speed 6.0 x 267.9 MHz
Base frequency (cores) 267.9 MHz
Base frequency (ext.) 267.9 MHz
Rated Bus speed 1071.7 MHz
Stock frequency 3166 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x
Microcode Revision 0xA0C
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 6 MB, 2 thread(s)
FID/VID Control yes
FID range 6.0x - 9.5x
Max VID 1.250 V

IBRS not supported
IBPB not supported
STIBP not supported
RDCL_NO no
IBRS_ALL not supported

Temperature 0 48 degC (118 degF) (Core #0)
Temperature 1 48 degC (118 degF) (Core #1)
Clock Speed 0 1607.57 MHz (Core #0)
Clock Speed 1 1607.57 MHz (Core #1)
Core 0 max ratio (effective) 9.5
Core 1 max ratio (effective) 9.5