Gigabyte GA-M56S-S3 - po upgrade na Athlon 5200+ nefunguje

A jakou máš verzi biosu? Clear CMOS jsi zkusil? (viz manuál k desce)

manual k desce pouze na netu

To mi oznamuješ nebo co?

ne jen ho nemam jako prirucku ale jen sem ho stahl z netu ale co tam je za bios jsem nenasel a clear cmos jsem nezkousel

You Begin:
1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your
motherboard model.
2. Extract the file and save the new BIOS file (e.g. M56SS3.F1) to your floppy disk, USB flash drive,
or hard drive. Note: The USB flash drive or hard drive must use FAT32/16/12 file system.
3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can
access Q-Flash by either pressing the <End> key during the POST or pressing the <F8> key in
BIOS Setup. However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard
drive attached to an independent IDE/SATA controller, use the <End> key during the POST to
access Q-Flash.
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2007, Award Software, Inc.
GA-M56S-S3 D1
....
<DEL>: BIOS Setup/Q-Flash <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
06 neco jako tohle jinak nic sem tu nenasel jestly se v tom vyzas

To je návod na flashnutí biosu - co já s tím?