Pokial by to nahodou neslo tak jak to je, tak kedze mas southbridge ICH8 (neviem presne ktory ale tipujem ICH8R) by som skusil v tom txtsetup.oem upravit na zaciatku tie riadky takto:
[Defaults]
scsi = iaAHCI_8RDHDO

;################################################# ############################
[scsi]

; iaAHCI.inf
# iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller"
# iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller"
# iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller"
iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"
# iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller"
# iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"
# iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller"
# iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller"
# iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller"
# iaAHCI_PCHM = "Intel(R) PCHM SATA AHCI Controller 4 Port"
# iaAHCI_PCHM_1 = "Intel(R) PCHM SATA AHCI Controller 6 Port"
# iaAHCI_PCH = "Intel(R) PCH SATA AHCI Controller"

; iaStor.inf
# iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller"
# iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller"
# iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller"
# iaStor_8R9R10RDOPCH = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller"
# iaStor_8ME9MEPCHM = "Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller"

tym vyhodis vsetky ostatne okrem AHCI ICH8R. Keby to potom hadzalo nejake errory tak potom skusit dat ;# namiesto # (neviem zhlavy jak je to spravne)
Ale predpokladam ze to vobec nebude nutne upravovat.