Přidat otázku mezi oblíbenéZasílat nové odpovědi e-mailem ROOT mobilu HTC Wildfire S

Už jsem nato přišel ale když to dám do překladače nedává to význam.Mohl by mi někdo pomoci? :( Moc díky!!

4A. Install ClockworkMod Recovery
Quote:
1. Download the official 5.0.2.8 image at ClockworkMod’s download page. Make sure you choose the right one for your device whether Marvel or MarvelC (listed as "Wildfire S" and "Wildfire S CDMA" respectively) and save it somewhere you can find it later. If you downloaded the zip version, extract the img file from the zip you just downloaded.

2. Boot the phone into HBOOT. (You are a pro at this by now, right? ) After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.

3. Open a command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.

4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img

If you have downloaded the MarvelC image, the image name will be recovery-clockwork-5.0.2.8-marvelc.img.
If CWM Recovery will not load on your phone and you get a black screen when loading recovery from HBOOT (this is very common with the newer ROM builds) then try TWRP Recovery which, as you would expect, comes in GSM and CDMA flavors. You can download and install it with GOOManager or download it directly from TeamWin: GSM or CDMA

4B. Download root.zip and put it on your SD card.

4C. Flash root.zip
Boot into HBOOT and go into Recovery. Then select install zip from sd card and choose zip from sd card. Then find the root.zip file downloaded above and install it.

Reakce na odpověď

1 Zadajte svou přezdívku:
2 Napište svou odpověď:
3 Pokud chcete dostat ban, zadejte libovolný text:

Zpět do poradny