Přidat otázku mezi oblíbenéZasílat nové odpovědi e-mailem Zvladne tyto komponenty zdroj?

DVD nemam(mam neni zapojene)ale to je detail.No co jsem nasel na netu o tom zdroji tak pisou tohle(neni to ale 80+ :D ) I tak drzi porad :)
ATX-350PNF

Dimension : 140 x 150 x 86mm

Application : For PC

Watt : 350

PFC : Psaaive

High efficiency over 70%

Over-voltage protection

Over-current protection

Short-circuit protection

Approved by UL, CSA, TUV, NEMKO, CB & CE

Internal 12 cm fan

MTBF: 100K hours at 25°C

Input Specifications

• Voltage:

220-240VAC

• Frequency: 47 Hz to 53 Hz

• Input current: 4 amps maximum / 230 Vrms, 50Hz

Output Specifications

• Over-voltage protection: +3.3V (4.6V max.), +5V (6.5V max.),

12V1 (15.5V max.), 12V2 (15.5V max.)

• Over-current protection: +3.3V (75.0A max.), +5V (56.0A max.),

+12V1 (25.0A max.), +12V2 (30.0A max.)

• Short circuit protection: The power supply is prevented from output over current.

• Remote ON/OFF control: The power supply shall accept a logic open collector level which

will disable / enable all output voltage (excluding +5V standby).

• Power good signal: 230V (full load) : 100 - 500 ms

General Specifications

• MTBF:

100K hours at 25°C

• Efficiency: 70% min.

• Hold-up time: 12.0ms minimum at 230V/50Hz.

Environmental Specifications

• Operating conditions:

ambient temperature 0°C~50°C, 90% RH

• Storage and

shipping conditions: ambient temperature -20°C~65°C, 95% RH

• Dielectric strength: primary to frame ground 1800 VAC for 1 second,

primary to secondary 1800 VAC for 1 second

Output

Output Voltage Min. load Max. load Load Reg. Ripple & Noise

+3.3V 0.5A 22.0A ±5% 50mV P-P

+5V 0.3A 21.0A ±5% 50mV P-P

+12V1 1.0A 18.0A ±5% 120mV P-P

+12V2 1.0A 16.0A ±5% 120mV P-P

-12V 0.0A 0.3A ±10% 120mV P-P

+5Vsb 0.0A 2.0A ±5% 50mV P-P

‧+3.3V&+5V total output shall not exceed 130 Watts.

‧+12V1&+12V2 total output shall not exceed 300 Watts.

Reakce na odpověď

1 Zadajte svou přezdívku:
2 Napište svou odpověď:
3 Pokud chcete dostat ban, zadejte libovolný text:

Zpět do poradny