Pokousim se prinutit Ubuntu server 16.04 LTS k bondingu dvou sitovek jako 802.3ad, a tak neak se uplne nedari. Mate nekdo s timto osobni zkusenost?
Interfaces mam takhle:

        bond-slaves eth1, eth2
        bond-mode 4
        bond-miimon 100
        bond-lacp-rate 1

plus standardni nezbytnosti, sam bond a sitovky jsou "up" a nejak to bezi:

Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 9c:69:b4:61:ae:ae
Active Aggregator Info:
        Aggregator ID: 2
        Number of ports: 2
        Actor Key: 13
        Partner Key: 20030
        Partner Mac Address: 60:9c:9f:22:a3:00

Slave Interface: eth1
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 9c:69:b4:61:ae:ae
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
    system priority: 65535
    system mac address: 9c:69:b4:61:ae:ae
    port key: 13
    port priority: 255
    port number: 1
    port state: 63
details partner lacp pdu:
    system priority: 1
    system mac address: 60:9c:9f:22:a3:00
    oper key: 20030
    port priority: 1
    port number: 15
    port state: 61

Slave Interface: eth2
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 9c:69:b4:61:ae:af
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 1
details actor lacp pdu:
    system priority: 65535
    system mac address: 9c:69:b4:61:ae:ae
    port key: 13
    port priority: 255
    port number: 2
    port state: 63
details partner lacp pdu:
    system priority: 1
    system mac address: 60:9c:9f:22:a3:00
    oper key: 20030
    port priority: 1
    port number: 16
    port state: 61

- jenze odchozi provoz se nedeli na oba slaves, ale tece vse jednim. Jen prichozi traffic se dle vseho deli na eth1 a eth2.

Napada nekoho, co delam spatne?