Jsou zobrazeny jen nové odpovědi. Zobrazit všechny
Předmět Autor Datum
problem ciastocne vyriesilo nove jadro (sice nie stable ale co uz) 2.6.15-1-k7. podarilo sa mi ukeca…
fleg 09.03.2006 20:25
fleg
lspci? A co pinda?
michich 09.03.2006 22:50
michich
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 10) 0000:00:01.0 PCI bridge…
fleg 09.03.2006 22:57
fleg
To neni nic prekvapiveho. lspci pouziva statickou databazi nazvu PCI zarizeni /usr/share/misc/pci.id… nový
michich 10.03.2006 13:51
michich
ok ale ako vysvetlis potom toto;o)? hdparm -i /dev/hda /dev/hda: Model=WDC WD1600JB-22GVC0, FwRev=… poslední
fleg 10.03.2006 15:16
fleg
[ot] len aby si vedel, ze dnes mas svoj den slavy: http://zive.cz/poradna/SubChild.asp?Qst=290930&Ma… nový
IgorK 09.03.2006 23:03
IgorK
Dik :-) nový
michich 10.03.2006 13:52
michich

0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 10)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:11.0 IDE interface: ATI Technologies Inc: Unknown device 437a
0000:00:12.0 IDE interface: ATI Technologies Inc: Unknown device 4379
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5954

ok ale ako vysvetlis potom toto;o)?
hdparm -i /dev/hda

/dev/hda:

Model=WDC WD1600JB-22GVC0, FwRev=08.02D08, SerialNo=WD-WCAL96809778
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Zpět do poradny Odpovědět na původní otázku Nahoru