Disable SATA native mode
NOTE: This option is not available in the BIOS on Vista models.

1.
Start the notebook PC.
2.
Repeatedly press the F10 key (or key designated by the notebook PC) until the notebook enters the Computer Setup screen.
3.
Use the arrow keys to select System Configuration .
4.
Use the arrow keys to select SATA Native Mode and set the mode to Disable .
Figure 4: Disable SATA Native Mode
5.
Press the F10 key (or designated key to accept the changes).
6.
Save changes and exit Computer Setup.
7.
The notebook should restart.



Jestli nerozumíte anglicky, zkuste slovník.