tak ovladače jsem nainstaloval a chová se to stejně. BIOS je PHOENIX- AWARD v6.00PG.
Prolezl jsem ho a FSB jako samostatný tam není. Jumry na MB taky nejsou.

toto je pouye v manualu :

jumpr JP1 2-3 On: 100MHz
(forced FSB speed)
1-2 On: Auto
(default)

jede to pouze na AUTO


The default setting is Auto. The system will run according to the front
side bus of the CPU installed on the system board.
Important:
• If you are using a CPU whose frequency has been locked
by the manufacturer, overclocking will have no effect.
• Overclocking may result to the CPU’s or system’s instability
and are not guaranteed to provide better system


CPU Clock Ratio
This field is used to select the CPU’s frequency ratio.
Important:
The frequency ratio of some processors may have been locked
by the manufacturer. If you are using this kind of processor,
setting an extended ratio for the processor will have no effect.
The system will instead use its factory default ratio.
3.1.8.2 Auto Detect PCI Clk
When enabled, the system will automatically send clock signals to
existing PCI devic