USB Flash disk odmítá zformátování

Dones mne tu kolega tuhle srandicku, ze prej ji pouzival v Linuxu a tam taky vymazal jeji obsah, po pripojeni hlasi WinXP system souboru RAW, velikost flešky aj. ale odmita ji zformatovat, potiz je ovsem v tom ze kolega Linux uz zrusil a nechal to na mne at se staram, lze tohle nejak opravit, je na tohle nejaky programek?Neco sem hledal, mozna malo, ale nenasel nic, poradite?

Předmět	Autor	Datum
A nejde odebrat a znovuvytvorit cely oddil (nasledne jej naformatovat)? mif 23.12.2006 23:49	mif	23.12.2006 23:49
U některých flashek jsou potřeba spešl formátovací softíky od výrobců, zkus se podívat na stránky vý… rokator 23.12.2006 23:59	rokator	23.12.2006 23:59
na tejto stranke: yyehzh sa pise: Now, the reason that you can't use NT's convert utility to conver… 2laak 24.12.2006 08:19	2laak	24.12.2006 08:19
3. riesenie(moje vlastne, mohlo by fungovat), zaklade MIFej pripomienky: Pravy klik na My Computer (… 2laak 24.12.2006 08:36	2laak	24.12.2006 08:36
dalsie co som nasiel na linux FAQ stranke: Don't quick format them (default under Winblows). You mu… 2laak 24.12.2006 08:43	2laak	24.12.2006 08:43
Diky vsem za podnetne pripominky, s tou spravou partition jsem to zkousel jeste nez sem zalozil tohl… borsuk 24.12.2006 12:16	borsuk	24.12.2006 12:16
super, neoznacis za vyriesene? ;-) poslední 2laak 25.12.2006 06:58	2laak	25.12.2006 06:58

A nejde odebrat a znovuvytvorit cely oddil (nasledne jej naformatovat)?

U některých flashek jsou potřeba spešl formátovací softíky od výrobců, zkus se podívat na stránky výrobce té tvojí flashky, jestli tam není k dispozici nějaká utilitka. Případně jestli ten tvůj kámoš nemá nějaký CD?

na tejto stranke: yyehzh sa pise:

Now, the reason that you can't use NT's convert utility to convert the file system to NTFS is because the convert utility only converts a partition formatted as FAT to one formatted as NTFS. Only FAT to NTFS. Not FAT32 or HPFS or Raw to NTFS. Mole reiterates--just FAT to NTFS.

tu riesili ten isty problem[ENG]: 8bp8d

1. riesenie: I solved my problem!!!!!!!1 Im SOOOOOOOOOO happy. I contacted the customer care and they gave some driver. and tadaaaaaaaaa

= skus aj ty kontaktovat tu carovnu support diviziu.

2. riesenie:
Here is a detailed explanation of what worked for me, I had the same problem you did.
1. Assume ALL FILES ARE LOST on the drive. You're SOL on these files (you may be able to recover the contents of many of them after the procedure, but don't get your hopes up)
2. Download the free Active Kill Disk from www.killdisk.com
3. Unzip and run Active Kill Disk. It will display the message that it supports "[ONE PASS ZEROES]" method only. Remember this.
4. Press enter to bypass the startup screen.
5. Scroll down the list to view your drives. Also, open up My Computer so that you know which drive letter your USB Key ISN'T. You will probably find a message of a drive not being ready, if you find this message, highlight that drive, otherwise highlight the drive that does not have the drive letters of the workable drives of your computer.
For example, in addition to my main hard drive C: I also have a big hard drive E:. These show up as fine since it was my USB key (which is on F:, but that doesn't matter now) that was damaged.
6. Press F10 and press enter to erase the disk (using that [One Pass Zeroes] method mentioned earlier
7. Go into the Administrative Tools (this guide is assuming Windows XP) and select Computer Management. Double-click on Disk Management.
8. Go down the list of disks until you find the new healthy partition of the USB drive. Right click it and say format. Format it whatever you want. If after the attempted format it says something like "I can't do this because the partition is write-protected," ignore this message.
9. Go down to a green icon on the taskbar with an arrow on it, click it and say to remove your usb drive. After it says you can remove it, do so.
10. Insert your USB drive again. Even though disk management said you couldn't format it, it did most of the reformatting and you will be able to recover any undamaged files from the combination of reformatting/erasing.
11. Once you save any files that you can, reformat the USB drive (you won't have any errors this time) from My Computer. Remember that the reformatting will erase all the files on the drive. Once this reformat is complete you'll have your USB drive working again!

3. riesenie(moje vlastne, mohlo by fungovat), zaklade MIFej pripomienky:
Pravy klik na My Computer (Tento pocitac) -> Manage (Spravovat) -> Disk management (sprava diskov?) Tam si najdi svoj USB a skus Odstranit tu particiu z USBcka a vytvorit novu, malo by sa ju dat formatovat do vytuzeneho FAT16, snad.

Vela stastia a informuj nas, ako to dopadlo a co pomohlo pekne vianoce...

dalsie co som nasiel na linux FAQ stranke:

Don't quick format them (default under Winblows). You must manually uncheck that. Are you?
I've pulled off multiple disk conversions without any snags whatsoever. If using the "dos" version of format, you may want to go c:\>format a: /f to force it. More options are avilable by going c:\>format /?, sorta like going man fdformat under Linux.

Aj toto niekomu fungovalo. Ako som cital co my vypluval google, tak je viac rieseni a kazdemu funguje daco ine, takze usilovne vsetko vyskusat

edit: este som zabudol URL: http://www.linuxquestions.org/questions/showthread. php?t=196463

Diky vsem za podnetne pripominky, s tou spravou partition jsem to zkousel jeste nez sem zalozil tohle vlakno, manager disku ve Windows sice flesku pozna, ale vypisuje neznamy oddil a moznost jej odstranit neni dostupna.To 2laak:ty navody vypadaji nadejne, anglictina neni moje silna stranka, tak k tomu sednu pres svatky a pak pisnu jak to slo.

Edit:Vyreseno, sprava oddilu pred spustenim instalace WinXP, neznamy oddil byl odstranen a pote znovu vytvoren, fleska je jiz citelna.

super, neoznacis za vyriesene?

Zpět do poradny Odpovědět na původní otázku Nahoru