hladam linuxakov

tak mi povedzte ci uz niekto vyriesil (riesil) podporu dma pri chipset atix200. disky mi v nom akosik idu len v pio mode a neviem ich prinutit k dma.
kernel 2.6.8-2-k7 #1 Tue Aug 16 14:00:15 UTC 2005 i686 GNU/Linux system debian
ide o pata disky

tady jsem ti našel diffy do jádra, ATI desku s tučňákem neprovozuju.

www.c.csce.kyushu-u.ac.jp/~kenta/index.php?Linux%20 on%20RS480

EDIT: BTW, máš docela staré játro

debian nema novsie jadro pre amd (ak neratame pre k8 ale nechcem tam amt 64b)...idem sa pozriet na tych japoncikov

Huh?
$ apt-cache search --names-only 'linux-image-2.6.*k7'
linux-image-2.6-k7 - Linux kernel 2.6 image on AMD K7 machines
linux-image-2.6-k7-smp - Linux kernel 2.6 image on AMD K7 SMP machines
linux-image-2.6.15-1-k7 - Linux kernel 2.6.15 image on AMD K7 machines
linux-image-2.6.15-1-k7-smp - Linux kernel 2.6.15 image on AMD K7 SMP machines

ja som siel podla http://packages.debian.org/cgi-bin/search_packages. pl?keywords=kernel-image-2.6&searchon=names&subword =1&version=stable&release=all tam nic take nie je
navyse:
apt-cache search --names-only 'kernel-image-2.6.*k7'
kernel-image-2.6-k7 - Linux kernel image for version 2.6 on AMD K7.
kernel-image-2.6-k7-smp - Linux kernel image for version 2.6 on AMD K7 SMP.
kernel-image-2.6.8-2-k7 - Linux kernel image for version 2.6.8 on AMD K7.
kernel-image-2.6.8-2-k7-smp - Linux kernel image for version 2.6.8 on AMD K7 SMP.

Protoze od jiste doby se ty baliky jmenuji linux-image a ne kernel-image. Linux totiz neni jediny kernel, na kterem Debian jede.

Jo, aha, ty navic prohledavas jen stable, tak to pak mas smulu. V Sarge skutecne vyssi verze neni.

problem ciastocne vyriesilo nove jadro (sice nie stable ale co uz) 2.6.15-1-k7. podarilo sa mi ukecat disky na dma100 aspon aj ked lspci stale pinda ale kaslem nanho. ako sa to bude spravat v praxi uvidime

lspci? A co pinda?

0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 10)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:11.0 IDE interface: ATI Technologies Inc: Unknown device 437a
0000:00:12.0 IDE interface: ATI Technologies Inc: Unknown device 4379
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5954

To neni nic prekvapiveho. lspci pouziva statickou databazi nazvu PCI zarizeni /usr/share/misc/pci.ids. Mas starou databazi. Aktualizuj si ji prikazem update-pciids.

ok ale ako vysvetlis potom toto;o)?
hdparm -i /dev/hda

/dev/hda:

Model=WDC WD1600JB-22GVC0, FwRev=08.02D08, SerialNo=WD-WCAL96809778
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

[ot] len aby si vedel, ze dnes mas svoj den slavy: http://zive.cz/poradna/SubChild.asp?Qst=290930&Main =6 [/ot]

Dik