Tahle deska nemá reset tlačítkem. Vpravo úplně dole na desce jsou jumpery CLRTC- jumper se posune na propojení o jeden pin vedle na 5-10 sec, tím by se měl uvést BIOS do základního nastavení. Je lepší vypojit PC ze zásuvky a vyndat i knoflíkovou baterii. Deska má i funkci
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings when the system hangs due to overclocking failure. C.P.R. eliminates the need to open the system chassis and clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically restores the CPU parameters to their default settings.

CLRTC:
To erase the RTC RAM1. Turn OFF the computer and unplug the power cord.2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5–10 seconds, then move the cap back to pins 1-2.3. Plug the power cord and turn ON the computer.4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.